Starting at : $0 US*
*All black

  • Model # : OB00921
  • Baffle type : Stainless steel
  • Diameter of smoke pipe outlet : 150 mm
  • Optimum efficiency : 76,30%
  • Thickness – Top : 6 mm
  • Heating environment (m³) : 55 - 230
  • Maximum burn time : 3 - 5
  • Approved for an alcove installation
  • Glass air-wash system
  • Color : Metallic black
  • Model : Legs
  • Baffle type Stainless steel

  • Diameter of smoke pipe outlet 150 mm

  • Firebox – dimension (Height) 276 mm

  • Firebox – dimension (Width) 467 mm

  • Firebox – dimension (Depth) 318 mm

  • Overall dimension (Height) 654 mm

  • Overall dimension (Width) 581 mm

  • Overall dimension (Depth) 557 mm

  • Door opening – dimension (Height) 194 mm

  • Door opening - dimension (Width) 381 mm

  • Optimum efficiency 76,30%

  • Firebox thickness – Outline 5 mm

  • Thickness – Top 6 mm

  • Maximum log length 43 cm

  • Shipping Weight 124 kg

  • Nominal heat output 5 kW

  • Heating environment (m³) 55 - 230

  • Glass surface – dimensions (Width X Height) 338 mm x 195 mm

  • CO at 13% O2 0.114 %

  • Maximum burn time 3 - 5

  • Fuel type Dry cordwood (16" recommended)

  • Door type Single, glass with cast iron frame

  • Glass type Ceramic glass

  • Firebox nominal volume (m³) 0,035

  • Approved for an alcove installation Yes

  • Glass air-wash system Yes

  • Model Legs

Customer reviews

The reviews or ratings you are reading come from homeowners who have bought the product and registered their warranty online. Therefore, in order to write a review, you must have purchased the product and you must register your warranty using our Warranty Registration section. Information about your product, such as its serial number, will be requested.
The reviews or ratings you are reading come from homeowners who have bought the product and registered their warranty online. Therefore, in order to write a review, you must have purchased the product and you must register your warranty using our Warranty Registration section. Information about your product, such as its serial number, will be requested.

Heating cost calculation

Select your country
What is your current annual heating cost ?
What type of combustible do you currently use ?
Can you specify the unit cost of your actual combustible ?
What is the combustible you wish to compare ?
Can you specify the unit cost of combustible to compare ?
Your annual estimated saving with
* For wood, all calculations are based on a full cord measuring 1,2 m X 1,2 m X 2,4 m (4 ft X 4 ft X 8 ft). In certain regions of Canada, we call a cord what is in fact a third of a cord: 0,4 m X 1,2 m X 2,4 m (16 in X 4 ft X 8 ft). If what you buy is a third of a cord, multiply the price by 3. For the efficiency variable, we assume in our calculations that the stove used is one tested according to the EPA or CSA B415.1 standards.
Terms and conditions

Terms and Conditions

1. This calculator enables you to compare your current heating system and combustible with other heating systems or combustibles. However, we deny any responsibility and offer no guarantee as to the accuracy and integrality of the data supplied.

2. The results obtained from this calculator must only serve as a guide and cannot replace the detailed calculations performed by a specialist. For a detailed evaluation of your heating costs, please consult a professional.

3. By using this calculator, you automatically agree to the conditions stated above.

4. This calculator was carefully programmed. However, some computer errors may occur. If you encounter any error, please do not hesitate to communicate with us at : marketing@sbi-international.com

 

Minimum clearances to combustibles * (Data expressed in inches. 1 inch = 25.4 mm)
Canada USA
  • Single walled pipe
  • Doublewalled pipe
  • Single walled pipe
  • Doublewalled pipe
  • Back
  • Sides
  • Corners
  • Top **

* The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).

** Measured from floor. Some appliances have been tested with a low ceiling. If necessary, consult the owner's manual for information on these clearances to combustible materials.

Options

Fresh air intakes

AC01331 - 5"Ø FRESH AIR INTAKE KIT
AC01331 English US
AC01349 - 5''Ø FRESH AIR INTAKE REGISTER WITH AIRTIGHT DAMPER
AC01349 English US
AC02090 - 5"Ø X 4' INSULATED FLEX PIPE FOR FRESH AIR INTAKE
AC02090

Required accessories

Requires the addition of required accessories to complete the unit

Accessories

Adhesives, gaskets and insulation
SILICONE AND 1/4'' X 1/2'' X 8' BLACK GASKET

AC06100

SILICONE AND 1/4'' X 1/2'' X 8' BLACK GASKET

Includes 8 feet of gasket and one tube of original high-temp adhesive.  Recommended for high efficiency EPA certified furnaces.


Paint
METALLIC BLACK STOVE PAINT - 342 g (12oz) AEROSOL

AC05959

METALLIC BLACK STOVE PAINT - 342 g (12oz) AEROSOL


Adapters
5"Ø X 10' INSULATED FLEX PIPE FOR FRESH AIR INTAKE

AC02093

5"Ø X 10' INSULATED FLEX PIPE FOR FRESH AIR INTAKE

Certified according to ULC S110/UL 181, this insulated flexible air duct is composed of four (4) layers of polyester encapsulating a galvanized wire; all assembled with a flame retardant adhesive. Fully water repellent, the duct is corrosion resistant as well as high static pressure thanks to the unique four-layer lamination process and wall thickness. The insulation contains no hazardous substances that may pose a health hazard.


5"Ø X 25' INSULATED FLEX PIPE

AC02094

5"Ø X 25' INSULATED FLEX PIPE

Certified according to ULC S110/UL 181, this insulated flexible air duct is composed of four (4) layers of polyester encapsulating a galvanized wire; all assembled with a flame retardant adhesive. Fully water repellent, the duct is corrosion resistant as well as high static pressure thanks to the unique four-layer lamination process and wall thickness. The insulation contains no hazardous substances that may pose a health hazard.


Government Incentives