Starting at : $3,999 US*
*All black

  • Model # : OP00025
  • Approved for a mobile home installation
  • Hopper capacity : 60 lb (27kg)
  • Baffle type : Stainless steel
  • Flue outlet diameter : 3"
  • Optimum efficiency : 78.4%
  • Average particulate emissions rate : 0.96 g/h
  • Recommended heating area-ft² : 500 - 2,000
  • Burn rate : 1.2 - 4.7 lb/h
  • Maximum burn time : 51 h
  • Tested and listed as per applicable standards : By an accredited laboratory (CAN/USA)
  • Approved for a mobile home installation
  • Combustion Technology : Top-feed
  • High-efficiency certified appliance
  • High-efficiency certified appliance
  • High-efficiency certified appliance
  • Electronic igniter
  • Electronic igniter
  • Electronic igniter
  • Approved for an alcove installation
  • Approved for an alcove installation
  • Approved for an alcove installation
  • Glass air-wash system
  • Glass air-wash system
  • Glass air-wash system
  • Blower included
  • Blower included
  • Blower included
  • Adjustable threaded legs
  • Adjustable threaded legs
  • Adjustable threaded legs
  • Hopper capacity 60 lb (27kg)

  • Baffle type Stainless steel

  • Flue outlet diameter 3"

  • Overall dimension (Height) 33"

  • Overall dimension (Width) 25 7/8"

  • Overall dimension (Depth) 30"

  • Optimum efficiency 78.4%

  • Average particulate emissions rate 0.96 g/h

  • Warranty Limited lifetime

  • Noise level at 6 feet 47 bBa (+/- 3 dBa) - 60 dBa (+/- 3 dBa)

  • Shipping Weight 286 lb (130 kg)

  • Maximum heat input rate 39,260 BTU/h (11.5 kW)

  • Overall heat output rate (max.) 28,540 BTU/h (8.36 kW)

  • Overall heat output rate < 6,648 BTU/h (1.95 kW)

  • Average overall efficiency (min. to max.) 75.8 %

  • Average overall efficiency (min. to max.) 70.3 %

  • Recommended heating area-ft² 500 - 2,000

  • Glass surface – dimensions (Width X Height) 17 1/4" X 9 1/2"

  • Average CO 7.6 g/h

  • Burn rate 1.2 - 4.7 lb/h

  • Combustion technology Top-feed

  • Maximum burn time 51 h

  • Tested and listed as per applicable standards By an accredited laboratory (CAN/USA)

  • Type of chimney ULC/ORD-C441, CAN/ULC S609, UL 641 (TYPE L)

  • Fuel type Pellet (Premium grade or better)

  • Door type Single, glass with cast iron frame

  • Glass type Ceramic glass

  • Approved for a mobile home installation Yes, with fresh air intake

  • AC Current 1.3A/120VAC - 2.5A/120VAC

  • 2.60A (312W)

  • 2.5A (140 W)

  • 8A - 250V

  • Voltage and frequency 120 VAC - 60 Hz

  • Canadian Standard (emissions) CSA B415.1-10

  • USA standard (emissions) EPA

  • Canadian standard (safety) ULC S627

  • USA standard (safety) UL 1482, ASTM E1509

  • Approved for an alcove installation Yes

  • Electronic igniter Yes

  • Glass air-wash system Yes

  • High-efficiency certified appliance Yes, EPA 2020 approved

  • Adjustable threaded legs Yes

  • Optimum heat transfer efficiency 73%

Customer reviews

118% of the last 50 homeowners who have registered their warranty are satisfied with this product
The reviews or ratings you are reading come from homeowners who have bought the product and registered their warranty online. Therefore, in order to write a review, you must have purchased the product and you must register your warranty using our Warranty Registration section. Information about your product, such as its serial number, will be requested.
The reviews or ratings you are reading come from homeowners who have bought the product and registered their warranty online. Therefore, in order to write a review, you must have purchased the product and you must register your warranty using our Warranty Registration section. Information about your product, such as its serial number, will be requested.

Heating cost calculation

Select your country
What is your current annual heating cost ?
What type of combustible do you currently use ?
Can you specify the unit cost of your actual combustible ?
What is the combustible you wish to compare ?
Can you specify the unit cost of combustible to compare ?
Your annual estimated saving with
* For wood, all calculations are based on a full cord measuring 1,2 m X 1,2 m X 2,4 m (4 ft X 4 ft X 8 ft). In certain regions of Canada, we call a cord what is in fact a third of a cord: 0,4 m X 1,2 m X 2,4 m (16 in X 4 ft X 8 ft). If what you buy is a third of a cord, multiply the price by 3. For the efficiency variable, we assume in our calculations that the stove used is one tested according to the EPA or CSA B415.1 standards.
Terms and conditions

Terms and Conditions

1. This calculator enables you to compare your current heating system and combustible with other heating systems or combustibles. However, we deny any responsibility and offer no guarantee as to the accuracy and integrality of the data supplied.

2. The results obtained from this calculator must only serve as a guide and cannot replace the detailed calculations performed by a specialist. For a detailed evaluation of your heating costs, please consult a professional.

3. By using this calculator, you automatically agree to the conditions stated above.

4. This calculator was carefully programmed. However, some computer errors may occur. If you encounter any error, please do not hesitate to communicate with us at : marketing@sbi-international.com

 

Minimum clearances to combustibles (Data expressed in inches. 1 inch = 25.4 mm)
  Canada USA
ArrPCAi :
CotPCAi :
CoiPCAi :
DesPCAi :

Options

Fresh air intakes

AC01240 - 3"Ø X 5' FRESH AIR INTAKE KIT
AC01240
AC02092 - 3"Ø X 10' INSULATED FLEX PIPE FOR FRESH AIR INTAKE
AC02092

Others

AC01460 - STORAGE TANK WITH PNEUMATIC SELF-FEEDING PELLET SYSTEM
AC01460 English US
AC01462 - STORAGE TANK EXTENSION FOR AC01460
AC01462 English US
AC01463 - STAND ALONE AUXILIARY DISCHARGE TANK
AC01463 English US
AC01464 - LEG ASSEMBLY FOR AC01463 DISCHARGE TANK
AC01464 English US
AC05558 - DIGITAL WALL THERMOSTAT
AC05558 English US

Required accessories

Requires the addition of required accessories to complete the unit

Accessories

Adhesives, gaskets and insulation
HIGH TEMPERATURE RED SILICONE (300 mL- 10.1 FL.OZ.)

AC02040

HIGH TEMPERATURE RED SILICONE (300 mL- 10.1 FL.OZ.)

A premium quality 100% silicone sealant that stays permanently flexible. Suitable for sealing around oven windows, flues on gas appliances, joints and metal stacks and ductwork. An excellent gasket maker to replace existing cork and felt rubber. Ideal for holding gaskets around stove and fireplace doors. Oxygen sensor safe. Withstands continuous temperatures up to 260°C (500°F) with temperature peak at 316°C (600°F).


HIGH TEMPERATURE CLEAR SILICONE (300 mL - 10.1 FL.OZ.)

AC02045

HIGH TEMPERATURE CLEAR SILICONE (300 mL - 10.1 FL.OZ.)

A premium quality 100% silicone sealant that stays permanently flexible. Suitable for sealing around oven windows, flues on gas appliances, joints and metal stacks and ductwork. An excellent gasket maker to replace existing cork and felt rubber. Ideal for holding gaskets around stove and fireplace doors. Oxygen sensor safe. Withstands continuous temperatures up to 232°C or 450°F.


Paint
METALLIC BLACK STOVE PAINT - 342 g (12oz) AEROSOL

AC05959

METALLIC BLACK STOVE PAINT - 342 g (12oz) AEROSOL


METALLIC BLACK STOVE PAINT - 85 g (3oz) AEROSOL

AC05963

METALLIC BLACK STOVE PAINT - 85 g (3oz) AEROSOL

Fits most products with a metallic black finish.


Maintenance products
3'' PELLET STOVE CLEANING KIT

AC02712

3'' PELLET STOVE CLEANING KIT

Maximize the efficiency of your pellet appliance using the proper service tools! The kit includes: A stainless steel bristled brush along with a long scraper featuring a tough steel blade and an ergonomic handle. Efficiently removes the hardened buildup on the burn pot surface and holes, as well as the outlet of the pellet supply auger housing. A 3" (76 mm) diameter chimney brush (1/4"-20 thread) with flexible rods allowing cleaning up to 10 feet (3.04 m). To ease maintenance of exhaust systems with offsets. A nylon bristled tapered brush with a long steel rod and a wooden handle. Ideal for tight spaces and diameters between 1" (25 mm) and 2 1/4" (57 mm). A glass cleaner (500 mL-16.9 fl.oz.). Used regularly, it prevents permanent stains on the glass.


3" ROUND PELLET STOVE BRUSH (1/4"-20 THREAD)

AC04505

3" ROUND PELLET STOVE BRUSH (1/4"-20 THREAD)

Nettoyez régulièrement vos conduits d'évacuation pour maintenir une efficacité optimale de votre appareil. Cette brosse 3"Ø, bien que fabriquée à partir de brins souples, sera tout aussi efficace. Spécifiquement conçue pour simplifier le ramonage d'évent à granules, notamment lorsque l’installation comporte des coudes 45° ou 90°.


4" ROUND PELLET STOVE BRUSH (1/4"-20 THREAD)

AC04506

4" ROUND PELLET STOVE BRUSH (1/4"-20 THREAD)

Regularly clean your vent pipes to maintain optimal efficiency of your appliance. This 4"Ø brush, although made from flexible bristles, will be equally effective. Specifically designed to simplify pellet vent sweeping, in particular with installation that have 45° or 90° elbows.


5' PELLET STOVE FLEXIBLE ROD (1/4"-20 THREAD)

AC04510

5' PELLET STOVE FLEXIBLE ROD (1/4"-20 THREAD)

Useful to sweep your pellet stove vent pipe #AC04503 #AC04504, #AC04505 ou #AC04506. Note: ¼"-20 thread and ¼"NPT are NOT compatible.


DRY CLEANING PAD

AC07824

DRY CLEANING PAD

Easily cleans the soot from glass without water.


PELLET APPLIANCE GLASS CLEANER (500 mL - 16.9 FL.OZ.)

AC07827

PELLET APPLIANCE GLASS CLEANER (500 mL - 16.9 FL.OZ.)

Special formula recommended for glass cleaning of wood pellet-burning appliances.


Government Incentives